⛳ How Do You Reset The Maintenance Light

A video tutorial on how to reset the oil life light as well as clear the maintenance required lights on a 2016 - 2022 Toyota Prius.If your Toyota Prius is in The instructions below tell you how to reset your oil change light, aka “maintenance light” on your 2007 or newer Toyota Tundra. You might want to read through this once before you do it…or watch the video. 1. Turn on the ignition (do not start the truck) and make sure that the odometer is set to “TRIP A.” 2. Turn off the ignition to 1. Turn on the ignition: Before you can reset the service light, you’ll need to turn on the ignition. Make sure your car is in park and press the start button to turn on the engine. 2. Press and hold the trip reset button: Once the engine is running, press and hold the trip reset button. To reset the light, first press the red reset button on the right side of your control panel. Hold the button down for up to 10 seconds before releasing it. If the light still flashes, go to step 3. Step 3: Reset Red Light. The power pack or engine may be overloaded, making this red maintenance light come on; then, it blinks after 30 seconds. With the engine and ignition off push and hold in the odometer reset button. While holding that button in, turn on the ignition but do not start the engine. After about 5 seconds the light will go Simply hold it in before moving on to the next step. 3. Turn the Key to Position Two. While holding down the trip meter, turn the key to the second position. Keep holding the trip meter down, and you should start to see a few messages coming across the dash. 4. Hold the Trip Meter for 10 Seconds. Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out. Let go of the odometer button and start your car. If the light is off when you start your car, the process is complete. Time needed: 3 minutes. Alright, it’s time to reset the service warning light on this Land Rover Discovery Sport. So let’s go inside the car and finish this job. Set the ignition to the on position. First, what you want to do is hit your START button to get the lights on but don’t turn the engine on yet. Open the Hood and Driver’s door. NPuf34.

how do you reset the maintenance light